Inicio » Unix » solaris 10 » Configurar un cliente NTP (Network Time Protocol) en Solaris

Configurar un cliente NTP (Network Time Protocol) en Solaris

Para configurar un cliente NTP (Network Time Protocol) en Solaris 10. Lo primero que hay que hace es crear el archivo /etc/inet/ntp.conf indicando la ip del servidor NTP, para que sincronicen contra el servidor de la hora.

vi /etc/inet/ntp.conf
#Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#ident  "@(#)ntp4.client        1.1     09/06/25 SMI"
# If you want to configure your client to listen for multicast, uncommnet
# this line. This should only be used for casual time keeping, like keeping
# a desktop system in sync.


# To configure NTP servers, replace the server_name with either the IP addre
# or hostname of the server you wish to use. If you just want to keep the ti
# in a causual way, one server may be enough for you. If you wish to keep it
# to a more accurate level, 3 or more is recommended. Do not choose 2, becau
# 2 servers is an unstable configuration. By the same token 3 is only accept
# if all are always available, since when a single one reboots or otherwise
# becomes unavailable, you have just 2.
# For a list of Internet NTP servers see
# If you use this list, be sure to read, understand and abide by the rules
# each server has published for accessing themselves.
# There is also a DNS round-robin pool of public access NTP servers. The
# instructions for accessing these are at
# Please consider adding your own servers to the pool if possible.
# Many ISP's also provide NTP servers for use by their customers.

#server <IP> iburst
server <IP>

# Always configure the drift file. It can take days for ntpd to completely
# stabilize and without the drift file, it has to start over on a reboot
# of if ntpd restarts.

driftfile /var/ntp/ntp.drift

# It is always wise to configure at least the loopstats and peerstats files.

# Otherwise when ntpd does something you don't expect there is no way to
# find out why.

statsdir /var/ntp/ntpstats/
filegen peerstats file peerstats type day enable
filegen loopstats file loopstats type day enable

# To track the events regarding the system clock, the protostats file can be
# as well.
#filegen protostats file protostats type day enable

# To see the current state of the crypto authentication protocols, enable th
# cryptostats file.
#filegen cryptostats file cryptostats type day enable

# The clockstats files are only useful if a hardware reference clock is
# configured. See the /etc/inet/ntp.server file for more information about
# that.
#filegen clockstats file clockstats type day enable

# The sysstats and rawstats output might be useful in debugging.
#filegen sysstats file sysstats type day enable
#filegen rawstats file rawstats type day enable

# The timingstats file is probably not useful at all. It is designed for
# perfomance debugging by the developers of NTP.
#filegen timingstats file timingstats type day enable

# There are several types on authentication supported by NTP. The easiest
# to use is a set of passwords, called "keys". They should be stored
# the /etc/inet/ntp.keys file. Each key in the ntp.keys file can be
# assigned to certain types of trust levels. See ntpd(1m) for more
# information on setting up key.

#keys /etc/inet/ntp.keys
#trustedkey 1
#requestkey 1
#controlkey 1

# To configure leap seconds processing, download the latest NIST leap seconds
# file to /etc/inet, and then create a symbolic link to it from the ntp.leap
# file. Without this file, NTP will still be able to accept leap announcements
# from its upstream sources. If this file exists and is less than 6 months old
# then the contents of this file will take precedence over the upstream servers.
# The latest leap seconds file is always available at

#leapfile /etc/inet/ntp.leap

Después hay que habilitar y reiniciar el servicio con svcs/svcadm. Y finalmente verificamos:

Solaris 10
svcs | grep ntp
 offline*        svc:/network/ntp:default
svcadm enable svc:/network/ntp
 svcadm refresh svc:/network/ntp
 svcadm restart svc:/network/ntp
svcs | grep ntp
 nline         2003     svc:/network/ntp:default

Solaris 9

Comprobación de que se ha realizado correctamente:
ntpq -p
About these ads

Deja un comentario

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de

Estás comentando usando tu cuenta de Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s